This is default featured slide 1 title
This is default featured slide 2 title
This is default featured slide 3 title

Plastic Window Treatment

Plastic window treatment is a sort of covering which is low cost, useful and free of any harmful chemicals. Before purchasing plastic window treatments make certain that it does not contain any injurious chemicals (like lead) which are dangerous from hygienic point of view. These coverings are mostly used to maintain the temperature of the room.

Solar Window Shades

Solar window shades are a type of plastic window treatment. They are usually put on the exterior windows and give you a clear sight of outside. Solar window shades as the name suggest are meant to control the sunlight that enters the room. Solar windows shades are helpful in both summer and winter seasons. In summer season, they keep the heat away from the room and in winter, they keep the hot air inside the room by reducing the cold air infiltration. Solar window shades are economical and usually lightweight. Solar control plastic window films are also available in the market which are capable of absorbing heat and light.

Plastic Venetian Blinds

Plastic venetian blinds are another type of plastic window treatment. It is made of PVC plastic and comes in many designs. The main advantage of these blinds is that they can be used in any room, kitchen or bathroom. Anywhere you have higher amount of humidity, these blinds are of great help. They usually have horizontal slats which you can open and close at will. So you can control the amount of light with them. Plastic venetian blinds are tough and long lasting.

Plastic Mini Blinds

Plastic mini blinds come with 1 inch small slats and are very economical. The one great benefit of these mini blinds is that they come in different colors and are rust proof. People living in coastal areas can use them effectively as coastal areas are more prone to rust and corrosion due to moisture in air. You can use them anywhere in the home, i.e. kitchen, bathroom, rooms. They usually come in standard size but you can have the custom made mini blinds as well. You can simply clean them with damp rag.

Plastic Sheeting

To prevent drafts and save energy, sheets of plastic are very handy on the windows. Clean the windows with damp cloth to remove all the grime and dirt from the surface. Take double -sided tape on windows frame to apply plastic sheet. Take proper measures and cut the sheet of plastic according to those measurements so that it will fit on the window properly. Carefully fix the sheet on the tape. To remove any wrinkles, you can use hairdryer. That will give a better finish to your plastic sheet on the window. Cut any extra plastic coming out of the edges.


Know the Reasons why Choose Wood Flooring

There are many advantages in using wood flooring. This kind of flooring is long lasting and also easy-to-repair. You will find wood flooring to last for more than hundred years and it is a preferred choice as it is quite durable. Other types of flooring materials are not as good and it requires fewer maintenance efforts. There are lots of new technology products that enable wood to maintain it sheen. Wood stains are easy-to-remove and all that is necessary is just limited sweeping and vacuuming.

Many people prefer wood flooring to other forms of flooring because it does not cause allergies. When you have carpeted flooring, there is always the danger of dust mites, mildew and mold formation. This problem is not experienced with wooden flooring which is not subject to problems such as pollen, animal dander and so on

There is a wide variety of styles to choose from in wood flooring. Commonly used is the ordinary plank flooring which is made from three-inch long wood pieces. The wide plank wood flooring is made from thick planks that are cut out of logs of varying lengths. Older homes with wooden floors are seen to have this type of wood flooring. Parquet flooring makes use of various species of wood planks for the flooring. Strip flooring is made out of shorter pieces of wood that are about two and one-quarter inches (5.7 cm) in width.

Whenever you think about making enhancements to your home, the first point to come to mind is that you should be implementing features that increase the value of your home and this is exactly what you gain with wood flooring. A home with wood flooring has a higher resale price because of the value of the flooring and for people who are looking specifically to buy a home with wood flooring, the seller can state his or her selling price.

If you are looking for a flooring variety that is not very expensive or which does not cost much, wood flooring is the best option. This kind of flooring can be done in within desired budget.


Easy Home Improvement Tips

– Make a list of home areas that you want to renovate and write out a detailed description of what you want to change and calculate the time and cost factor. Materials purchased for renovation must fall into the desired budget.

– Decide on the look what kind of a look you want. Do you want something that is of the vintage type or do you want to go in for something that is modern and trendy.

– Beautiful flooring can completely change the look of your home. If you are planning to install new flooring, check out the many floor types available, and assess the pros and cons of each type of floor material.

– Improvement to the bedroom area can be in tune with the potential changes in the interior arrangement. Adding a new bathroom to the room can enhance it considerably. Using latest fixtures or painting the bedroom with new paints is a good option.

– Improving lighting is yet another home improvement activity. Adding new window structures can bring more light into the room. Another alternative is using lighting fixtures that are energy efficient, yet which provide good enough lighting inside the room.

– Buying new furniture always changes interior appearances. You can opt for furniture that has a modern look. Select upholstery fabric that has a bright color and which comes with abstract or geometric patterns.

– Basement is yet another place for home improvement ideas and it can be used in so many ways such as an entertainment room or as a game room for kids. Water proofing the walls and patching up the holes and cracks in the wall using waterproof cement is necessary as part of the basic improvement step. The next step is to enhance the lighting effects and to improve the wiring and piping.

– Make judicious use of existing space. You should look into making the maximum out of available space areas but do this in such a way that there is openness in the area.


Tips to Set Up Bathtub Tiles

Required Items

– Diamond-tipped hole saw
– Sponge
– Grout
– Variable-speed drill
– Screwdriver
– Mastic trowel
– Chalk box
– Carpenter’s level
– Wet saw
– Mastic
– Grout float


1. Take a measure from top of the bathtub on one corner. Mark the height of the tile on wall. Repeat the process on the other side of the bathtub corner. Tiles are available in different geometric shapes square, rectangular etc. If you have rectangular tiles, decide which measurement you will take as its height.

2. Join the one mark with another with a chalk line. Measure the space between the bathtub and the marked line at different places to check whether the space remains the same or not. If the space varies select the shortest measurement. This measurement will be the size of the tiles to be cut.

3. Locate the center of the wall and mark that point. Place a carpenter’s level on it vertically. Stretch a line along the carpenter’s level. Take a wet saw and cut a first row of tiles with it. Before applying mastic to the wall, read the manual carefully and follow the instructions strictly.

4. Position the first tile in the center along the marked line. Take it as a guiding tile; add tiles on either the sides of the first tile. You may have to cut the tiles for the corners. Keep adding tiles and mastic to the walls properly.

5. Cover the opposite walls as well with tiles. In the end, use bull-nose tiles to finish off the last column.

6. Take the bathtub spout away by turning it in an anti-clock wise direction. Take the caps away to locate the screws holding the handles. Take screwdriver and unfasten the screws and eventually remove the handles. Follow the same process to remove the shower head.

7. Position the tiles on the wall. You have to drill hole in the tiles to make them able to fix into the fixtures. Measure the size of the pipes and choose a proper size hole saw to drill a hole in the tiles. Install the tiles and let the mastic settle down properly before proceeding with the grout.

8. Now apply the grout to the tiles lining in a zigzag pattern with grout float. Keep removing the excess of grout from the surface of the tiles with soft damp sponge. Once done with tiles installation, apply polish to give shine to the tiles. Later replace the fixtures.


Tips to Clean and Protect Your Carpet

Required Material

– Rubber gloves
– White cloth (soft and dry)
– Water
– Mild dishwashing detergent
– Vacuum
– Carpet protection solution



1. The first step in cleaning carpet is to vacuum it. Thoroughly vacuum the whole carpet. Use all the required attachments available with vacuum to clean the corners, crevices, under the furniture or behind the furniture. Also vacuum the baseboards. The best way to vacuum your carpet is from front to back. Always follow this while vacuuming your carpet.

2. After vacuuming your carpet properly, wear the gloves. Mix a mild dishwashing detergent in warm water. Immerse the sponge in the solution and squeeze it properly.

3. Using damp sponge, scrub any marks or stains gently, more force can result in embedding the stain into the fiber of the carpet. This method is popular for water soluble stains. For insoluble stains, you can use carpet stain removal products. Stain removal products are easily available at hardware stores. Before using any of the stain removal product, make sure that you have read all the instructions and cautions given on the product manual. These instructions will precisely help you remove the stains without damaging the surface or fibers of the carpet.

4. In the end clean the surface of the carpet with soft damp cloth. This will remove the left over residues of the soap or stain removal product. Let the carpet completely dry before allowing any foot traffic on it.

Protecting Tips

1. Protect your clean as much as possible from dirty shoes. Foot traffic is the main source of staining the carpet. Minimize the shoes contact with carpet and it will be easy for you to keep your carpet clean. Any other products or factors which cause stains like drinks or beverages should be kept away from the surface of the carpet. Your carpet cleanliness is depend on how far you keep your carpet save from these stain causing agents.

2. You can also protect your carpet from stains and dirt with the help of stain preventing sealants. These sealants are commonly available in the market and you can get them easily from any hardware store. DuPont Teflon Carpet Protector or Scotch Guard is popular stain preventing sealant that guards your carpet’s fiber from stains. Be careful while selecting a sealant for your carpet. Sealant must be appropriate for your carpet. Always read the instructions given on manufacturer’s manual before applying any sealant to your carpet.

3. It is important to let your carpet dry completely before allowing any foot traffic. You can use fans, windows or any other available sources to dry your carpet.


Tips to Furnishing Your Dining Room

Choose the right kind of table for your dining room

Consider what kind of dining table appeals to you and what will look right for the kind of setting you hope to create – whether a trestle table will look better or a pedestal table will fit better. A trestle table consists of two or three trestle supports linked by a longitudinal cross-member over which a board or tabletop is placed. A pedestal table on the other hand is a table supported by a single central column. The trestle table can appear less heavy and formal than the pedestal table, so you may want to consider that while choosing a dining table.

Also consider the kind of chairs that will go along with the table. Traditionally a trestle table is paired with Spindle back chairs. Consider as well, the practical aspect of cleaning etc. Cleaning around a pedestal table can be easier and since there is no space consuming table legs to worry about, this can actually help you save space if that is an important consideration. Just be sure that the pedestal table is well balanced and stable.

Consider Hutches

Hutches for dining room are an excellent idea, since they can be a versatile, good looking and practical addition to your dining room. It can serve as a display area for your fine china and silver ware if any. Or a hutch can be the place to store table linens, crockery and cutlery not currently in use as well as other dining table related items such as vases, candelabra and other more formal items not used on a day to day basis. A hutch can also double as a sideboard or server, so that you can lay out a buffet there. Even for a sit down dinner, you can lay out a few items there for guests to serve themselves.

A Table Pad

chances are you have spent quite a bit of time, effort and made a considerable financial outlay for your dining table in the hope that it will serve you well and continue to look good over several years. In the event you may want to consider getting a table pad that will help protect the table against, spills, scorching, scratches, daily wear and tear as well as other damage. Table pads not only protect the table, they also help to reduce vibration and absorb it.

A table pad can help to make your table be useful for a lot of other things – for instance the children’s homework and project work can get done there, when you take work home, the table pad can ensure that the table itself does not have to take the toll of excessive use.


Bamboo Hardwood Floors vs Carbonized Bamboo Flooring

There is certainly a strong competition between the bamboo hardwood floors and the real thing, but after looking closely at each option you will find it pretty easy to make your decision, based upon your budget and what sort of look you are trying to achieve.

One of the first things that you want to take into consideration when trying to make this decision is what sort of budget you have to work with. This is important because the real hardwood floors are much more costly, and so you may not even the money to afford them. You are going to need to figure out your budget before almost everything else, so that you can use this as one of the most determining factors as to whether or not you are going to get the bamboo hardwood floors.

Of course you also want to consider the aesthetic appeal here. There is a certain look that you are trying to achieve, and either the bamboo hardwood floors or real hardwood floors are going to be able to provide this for you. While at first glance the bamboo floors are quite similar to their real hardwood counterparts, it is very easy to see the difference.

Bamboo is a type of grass and so it does look like bamboo, although it is installed in long planks like the hardwood and so to the untrained eye it could most definitely pass for hardwood.

These are all important aspects to consider when you are trying to decide on what type of flooring to go with, and if you are still not sure then you will want to talk to a flooring specialist. They are the professional in this area and it is they who are going to be able to offer you the best advice. Make sure that you take all of their comments and information into serious consideration to make the right decision here because you don’t want to get the wrong flooring.

Overhead Garage Doors

Kinds or Designs

Overhead garage doors come in many designs, but most preferred designs are tilt up, roll over and sectional units. The oldest among them are tilt up design. It is a single panel that is raised up to the ceiling of the garage. Roll up garage door is made up a number of small sections joined together to from a single large unit. They contain a coil in which these doors roll over when opened. The third design is sectional units. They are made from 3-4 panels each of them joined with axles or hinges which help them to roll up into the coil overhead.


Different materials are used to make garage doors, but the most popular materials used are steel, aluminum, wood and fiberglass. Steel is the most commonly used material. It is affordable, easy to install and provide better security. Aluminum is very effective in coastal areas, as they provide good resistant against rust and corrosion. Fiberglass is the strongest material and is more durable than other materials. It is a bit expensive compare to other materials. Wood garage doors are good as far as their aesthetic designs are concerned. But they are not durable like other materials.


Each design has its own benefits and advantages. For roll up doors are quite handy for tall garage openings and require little space on ceiling. Tilts up doors are less expensive for being an older style of doors. They usually have clean smooth appearance. Sectional doors are popular because of durability and security. They provide better protection against different weather conditions. They come in different designs and styles.

Disadvantages and Drawbacks

Besides advantages and benefits, overhead garage doors have certain disadvantages and drawbacks also. Roll up units, for instance, are made of many panels and need a lot of maintenance work at times and also they are the expensive one. Tilts up units are not considered secure and they provide less protection against different weather conditions. Sectional units however secure and durable need more ceiling space on ceiling and often arises with certain mechanical discrepancies.

Overhead garage doors come in a variety of colors and glass vision lights. Other than that, there are many different designs and styles available in the market to give your garage a fine look. One of the best features of overhead garage doors is its automatic operators and remote control openers. However, manually operated doors are also available which are open and closed via a chain or a track system.


Tips to Clear Mildew

Find the Source

The best way to remove and kill the mold is to find its source. The source from where it is coming. If you don’t work on the source and just clean the affected areas, it will come back again.

Find the exact source of mold. It might be cause of the leak in pipes or seepage in roof or floor of the basement. Fix the problem as soon as possible. After removing the source, start working on the places affected by the mold.

Humid climate is another source for mold, especially near coastal areas. People who live near the sea or ocean have to work really hard to deal with mold. To avoid mold, it is important to keep your doors and windows properly sealed. If possible use dehumidifier to keep humidity level on lower side.

Scour Surfaces

The right way to remove the mold from hard surfaces is to scrape it off. Use non-ammonia detergent or regular soap to soak the mold and afterwards scrape it off from hard plastic, countertops, metal or glass. If you scrub the dry mold, there are more chances that it releases spores into the air. Close the room door so that spores to avoid spores from spreading. On certain surfaces like structural woods, you may need to sand along with scraping.

It is important to wear goggles, breathing mask and other protective clothing to prevent any contact with spores.

Sterilize or Disinfect

Just removing old from the surface is not enough. You have to take steps to sop the re-growth of the mold. To stop the re-growth of the mold, you need to disinfect or sterilize the area. For this you can use a mixture of water and bleach. Make solution according to the surface; for instance, make mixture of 1/4 to 1/2 cups of bleach per gallon of water for clean surface and make and use a mixture of 1 1/2 cups of bleach per gallon on concrete or wood surface. Apply the mixture on the surface and leave it for 15 minutes. Rinse it afterwards and dry the surface completely.

Remove Items

Cleaning mold is not just confined to places, porous item should be removed in order to keep mold out of the house. At times some items like carpet padding, drywalls and papers sustain damage from mold. They should be removed permanently to ensure that the mold would not develop again.


Window Insulation

Weather Strip

Weather stripping is a good way to apply insulation to the windows. It is a foam substance having a stick back. Clean the surface and apply the weather stripping on it. You need to apply it on the windows sill and around the outer edges. Examine the windows thoroughly. Check its frames, outer edges and panes etc. if you find any gap between windows frame and the house, fill it with caulk. Take caulking gun and apply caulk to the gap. Examine the panes for damage and worn caulking. Remove the old damaged calk and apply the new caulk.

Bubble Wrap

Bubble wrap is a form of temporary window insulation. Though it is not attractive, but it is cost effective and provides enough protection against the cold drafts. Cut a piece of bubble wrap exactly of the size of your window. Then spray a small amount of water on the inner surface of the window and swiftly place the bubble wrap on the windows surface. Firmly press it.

Insulation Kits

Insulation kits are now commonly available at hardware stores. Insulation kits are available in two designs one for indoor or interior kit and outdoor or exterior kit. The interior kit contain a sheets of plastic that have the tendency to shrink on exposing to heat, especially by hairdryer. The exterior kit contains a plastic sheet that staples to the exterior window frame with cardboard strips.

Storm Windows

Storm windows are another source for windows insulation. Many people ignore the fact of having storm windows and do not ever think of using them. If you have not used your storm windows for a long time, they might have become loose. Reusing them may not be that useful but will hold the drafts to some extent. Storm windows are very cost effective and will pay for themselves.

Insulated Blinds

Cellular blinds are another kind of windows treatment. They consist of three layers of cells and hence called honeycomb blinds. These blinds come in various designs and colors to match your interior home decoration. Honeycomb blinds form an obstacle between room and window by trapping air in the cells.

However, replacement windows are the best achievement to save the cooling and heating costs. But it is not always possible to use replacement windows due to high costs. In that case you can use other available choices for window insulation that are handy and cost effective.


Deck and Its Maintenance

1. The area and location where you live has certain impact on your deck in one way or another. Like if you live in West Coast (regular rains) most of the damage caused is due to water. Similarly, the people living in Florida may have to worry about the Ultraviolet rays. You have to workout on the factors which are responsible for the damage done to your deck. Water, mold, direct exposure to sunlight, dirt are some of the main factors affecting the deck.

2. If your deck is not protected by any sealant covering, it is best to apply sealant on your deck to protect it from water. Sealant not only provides shine to your deck but also make it water resistant. Before applying sealant, sand down the entire deck surface. This will help you remove any grime or dirt present on the deck surface. Choose a best water resistant varnish for your deck surface and apply it with the help of brush or roller.

3. If your deck has any stains or discoloration due to the direct exposure to sunlight, you can use bleach to remove the stains and to fight against discoloration. Bleach is powerful agent which removes stains and other dirt instantly. Bleach works well to fight against bacteria and other mildew or fungus. So, you can use bleach for mildew as well. However, it has mild effect on wood but that is negligible.

4. Inspect your deck regularly for any sings of damage. Any loose nails, chips or damaged parts should be treated as soon as possible. If you ignore these minor issues, they will extend over time and cause you major maintenance costs or might result in some severe damage. Repair any minor damage as soon as you come to know about it. If you find any major damage or cracks, consult some professional immediately to find any suitable way to fix those damages.

Following these directions will certainly help you to maintain your deck. You will be able to take proper care of your deck by keeping these important points in mind.


Seal Floor Tiles and Grout Tips

Required Material

– Acrylic floor finish
– Brush
– Penetrative tile sealant
– Topical tile sealant
– Water


1. Glazed or non-cemented tiles are usually water resistant. However, you can determine whether your surface needs a layer of sealant or not with the help of simple test. Take small amount of water and pour it on the surface and inspect it for some time. If you find that the color of the surface darkens, seal it. If no discoloration occurs that means there is no need to apply the layer of sealant.

2. Before applying the sealant, clean the surface properly. Make sure that no debris or dirt is left behind. Purchased the best sealant specified for the type of tiles you have. Start from the vertical surface. Apply sealant in an upward direction to avoid any stripes or trickling of the sealant. For horizontal surface, always work from inside out, i.e. from one wall towards another wall. Apply sealant evenly on the entire surface. Let the sealant dry for the required amount of time recommended in manufacturer’s manual.

3. After applying the topical sealant layer to your tiles and grout, now is the time to apply a layer of acrylic floor finish. A layer of acrylic finish provides a protection to the tiles that keep them secure from routine’s wear and tear. This layer is also called as wear layer for tiles that provides protection to the tiles and tile sealant underneath. Follow the instructions given on the manual of acrylic floor finish and leave it to dry for the time specified on the manual.

4. For stones or outdoor tiles, use penetrating sealant. Two layers of this sealant will be enough, but make sure that the first layer is dried off completely before applying the second layer. Apply the layer of sealant on the tiles or stones and let it dry. Later apply the second layer and leave it to dry.


– The ideal time to apply sealant is 2 weeks after of laying tile and grout.
– To get best results from sealant, let it dry for about 72 hours. However, the normal time for sealants to dry is between 24 to 72 hours. This time differs according to the different brands of the sealant.


Steps to Painting Steel Door

Required Items

– Following items are required to paint your steel door:
– Soap and water for cleaning
– Paint scraper
– Painting supplies, such as brushes or rollers
– Tarp
– Sandpaper
– 2 sawhorses
– Rags
– Tools to remove door hardware
– Masking tape
– Primer and paint


1. Prepare the area where you want to paint your door. Take a tarp and lay it down to keep your floor free from any paint marks. Place two sawhorses covered with rags to prevent any marks on the door.

2. Before painting the door, you have to take away all the hardware from the door. These include handle, doorknockers, locks, hinges and weatherstripping as well. Lay the door carefully onto the sawhorses.

3. Examine the door thoroughly and remove any dents or damaged areas if present. Take a paint scraper and scrape off the old paint from the door.

4. Clean the door with mild soap and water from both sides and let it dry for sometime.

5. Take a sand sponge or medium type sand paper and sand down the entire door lightly. Don’t apply force that might cause scratches to the door.

6. If your door contains and windows or glass or any such area, cover them with masking tape to prevent any paint stains on them.

7. Apply primer to the door surface. Two coats of primer are enough. You can use aerosol primer, brush or sprayer to apply primer on the door surface. Before applying the second coat make certain that the first coat is dried completely.

8. Once the primer is applies, apply paint to the door. You can use paint brush, sprayer or roller for your convenience. You need to apply two coats of paint on the door. Apply first coat and let it dry for some time and apply the second coat.

9. Let the paint dry completely. Reinstall all the hardware parts. Put back the locks, knobs, hinges and weatherstripping.

Points to Remember

– Before applying new paint, make sure you have repair all the damaged areas. If you left them unrepaired, they will soon spoil and damage your new paint and further deteriorates the condition of your door.
– Always do the paint job in well ventilated area and use breathing mask.


Ways to Soundproofing a Room

New Construction Soundproofing

1. The first thing you need to do while making a design for your home is not to keep the doors of rooms in the hallway directly opposite to each other. This will lower the sound transfer from one door to another.

2. You need to have thick walls than usual (2 x 6 plates) in your new construction. Put the studs in such a way that they form an alternate line amid of back and front edges of the top and bottom plates.

3. Use fiberglass batting insulation into the interior of the walls before applying drywall sheet to the walls.

4. Purchase a soundproof wall sheeting from any of the drywall contractor or home suppliers stores. Place the soundproof wall sheeting in a dangling position over the frame. It should remain behind the drywall.

5. Select double or triple paned vinyl windows for your new home. These windows not only provide good insulation against heat and cold, but also from sounds and noise.

After Construction Soundproofing

1. In an already built home, apply soundproofing is quite a tough or sometimes messy task. One way of which you might not think of is to dismiss one of the side walls, add fiberglass insulation and rebuild it again. However, there is a simpler way also. Drill a series of holes in the wall between the studs near the ceiling. Add cellulose insulation to those holes with blowing machine. You can take this machine on rent or you can hire a professional for this job. Secure the holes again and refinish the wall.

2. The next step is to insert soundproofing to your walls. Many sound deadening wall coverings are available in the market and you can purchase them easily from any home supplier stores or hardware and paint stores. You can also use cork tiles around your room or on the wall.

3. Build another wall inside the existing wall. Remember both the walls have an enough gap between them. This gap is due to the sound isolation clips. This gap will help to stop the sound waves from one room to another.

4. Paints containing fibers and resins are also available in the market. These paints have the tendency to absorb the sound waves. They are latex paints which are only renowned for their sound absorbing feature.

5. Carpets, draperies or shutters on the windows can also be helpful to stop the sound transmission. Solid doors can also be helpful in this regard.


Steps to Remove Shelf from Kitchen Cabinet

Required Material

– Reciprocating saw
– Locking pliers
– Flush cutting pliers
– Flat pry bar

For Adjustable Shelves

1. Clear the area around the shelf which you want to remove. If shelf contains any items or accessories remove them.

2. Hoist the shelf up and spin the shelf diagonally. Hoist one side higher than the other; this will help it to clear the cabinet opening. To release the cabinet shelf you need to press the clip holding the pins and shelf in place. Usually, you can simply press the plastic or metal flap at the top of the pin to release the shelf.

3. Take the shelf away from the position carefully. Don’t drag or bump the shelf along the cabinet opening. Dragging or bumping may cause damage to surface.

For Permanent Shelves

1. Permanent shelves are installed in a number of ways. You have to inspect the installation for your shelf. Some rest on the horizontal runner fixed to the bulkhead or side panel of the cabinet. Some are simply glued or nailed on the outside of the cabinet bulkhead.

2. Tap front bottom edge of the runner gently with a hammer to remove the shelves. You might need a pry bar to pry up the shelf gently from the runner. The shelves are usually glued or nailed to the runner so it might need some force to remove them from runner. Repeat the same process on all the remaining sides to let the shelf free from cabinet.

3. Take a flat pry bar and use it to remove the runner from the cabinet sides. Place the pry bar edge in the seam behind the runner. Tap it with hammer from above to widen the gap in seam. Pull the pry bar away from the cabinet panel. Keep prying until the runner is free enough to be removed.

4. Take a hammer and tap the shelf near the bulkhead gently to remove it from the cabinet. Keep tapping until you see that the seam between cabinet and shelf is beginning to wide. Once the seam is wide enough, pull the shelf away from the bulkhead of the cabinet.

5. In the end use locking jaw pliers to pull the nails out so that it will release the bulkhead. You can also cut them by using a pair of flush cutting pliers.


– You can cut the stubborn shelves in the middle with reciprocating saw to remove them easily.

Chimney Cleaning Tips

Before starting the cleaning process, close the fireplace area. Open the flue in the firebox and then the log grate. Clean up any debris from the fireplace and completely close the fireplace.

It is vital to get protective gear ready such as a face mask, gloves and goggles. Other important tools are chimney cleaning brushes, a rod that reaches down the full length of the chimney and a working flashlight.

After getting together the necessary tools, you can begin cleaning the chimney. If you choose the “Top down with Rod” method, the chimney is cleaned from the chimney rooftop. However, it is vital to seal of the fireplace so that soot does not spread all over the room. Lower the rod with the brush down the chimney length and rub it back and forth till the chimney is completely cleaned out. Use a flashlight to check out the chimney inside areas so that you can find spots that you have missed out. After cleaning the chimney, you would need to vacuum the area below to clean the debris completely. It is important to carry out the entire cleaning process very methodically so that it does not pose a danger for fires.

When you clean the chimney, you are bound to find cracked or missing bricks that have to be replaced or repaired. Be sure to replace them as it will help to keep the rain out of the chimney.


Tips to Clean Hardwood Floors

Regular Cleaning

Daily cleaning is an assurance of your hardwood’s long life. Always use a soft bristled broom to clean your floors. Using hard bristled broom can scratch the surface of your hardwood flooring. Dust mops or vacuum with soft brush attachment is another useful tool to clean your hardwood flooring. Dust mops are effective against the dirt and grime accumulated on the floor surface. To prevent the dirt accumulation into the finish of the wood through foot traffic, regular cleaning of the flooring is inevitable.

Maintenance Cleaning

A non abrasive solution is always suggested to mop the hardwood flooring. Mixture of 1/4 cup of mild dish washing liquid in a small amount of warm water is considered as the best non toxic and non abrasive solution to clean the flooring. Dry off the floor with dry towel attached to dry mop handle right after you have mopped the floor. It is better to take help from floor maker’s instruction before cleaning, especially when your warranty is still valid. Those instructions will best guide you. Besides this, you can use baking soda for scratch or scuff marks on the wood flooring. Gently scrub the marks to remove them. For old hardwood floors with insufficient finishing, you can use Murphy’s oil soap. Oil soap is not good for finished surfaces so avoid using oil soap as far as possible on finished hardwood floors.

Natural and Commercial Cleaners

Many natural products are available in the market which can be purchased and used for cleaning. However, you can make some of the cleaning solutions on your own that are equally effective and cheap. Natural hardwood cleaners are very usually non-toxic and help to maintain the beauty and shine of the floor for long time. You just need to mix a small amount of vinegar into a small amount of water. Use this solution to mop the sealed floor. For unsealed flooring water is harmful instead use any oil like linseed oil to clean the unfinished wood floors.


Wood Floor Installation

The entire process of installing wood floors must be done methodically. The floors can be installed over concrete slabs, plywood , or even existing wood floors. Here is a look at the steps involved in wood floor installation :

– It is necessary to get all tools necessary for installation purposes. Things such as screws, saw, nails, and pry bar and so on have to be got together before the installation process begins.

– Draw a reference line at the beginning point of installation and at the end point of installation. A half inch gap between boards is essential for the wood to expand.

– Choose only the straightest of wood boards for installation. The first wooden board can be laid out on key areas such as the door area and so on. It is necessary to align the first row of wooden boards correctly so that subsequent rows come out straight.

– When you lay down the subsequent rows of hardwood boards, it is necessary to hammer the rows correctly so that there is a tight fit. Each of the boards must be laid down in a perpendicular manner and the process must be done accurately so that no gaps are visible.

– As you reach the last row, you would need the use of a pry and block bar for the purpose of locking them securely. When you install hardwood floors over large area, you need to make use of a heavy nails on each edge at the end of the third floor.

– In end row area, you will find it hard to install more planks and here using ring-shank nails are a good option.

Once you have done the installation fully, you need to check for flaws in the floor. If you find gaps in the flooring, try to push the hardwood using a pry bar. In case there are still some gaps in between the flooring using decorative borders can help to cover them up.


Guide to Fix Front Entry Steps

Required Material

– Cement
– Two buckets
– Hammer
– Plastic sheet
– Pressure washer
– Metal or wooden stakes
– Chisel
– Strips of lumber the length of your stairs
– Paintbrush
– Broom
– Coarse sand


1. Clean the front step properly to have a better idea of any loose or crumbling cement.

2. Remove the loose cement from the steps with the help of hammer and chisel.

3. Before proceeding further, pressure wash your steps with 10 inch spray. This will remove all the grime, dirt or other debris present on the surface of the steps.

4. Now you have to make your mind that how thick layer of concrete layer you want on the steps. The ideal choice would be around three quarters of an inch.

5. Put the pieces of the lumber on each side of the steps to prevent concrete coating to ooze over the edges of the steps. Make sure that the height of the lumber should be leveled with the concrete coating.

6. It is important to secure the lumber pieces so that they remain firm against the steps. Firm hold lumber pieces ensure that no concrete will ooze away.

7. Make a mixture of concrete and coarse for your coating or overlay. Take two parts of sand with one part of cement and make a mixture.

8. To make the mixture thin enough to flow out of the bucket easily add some water to it.

9. To prepare the cement paint, take another bucket and add water cement and water to it until you have consistency of paint. This mixture is helpful in proper adherence of the concrete coating

10. Spread a layer of cement paint on the steps. To distribute it evenly on the surface you can use paintbrush.

11. After the cement paint layer, apply the mixture of concrete over the surface of the steps to give it a new coating of concrete. After applying the coating of concrete, wait for an hour or so to take it position on the steps.

12. Cover the newly coat of concrete with plastic for few days. This will help concrete to settle down properly on the steps.

13. After few days take the sheet off from the newly coated steps and add a second coat of cement paint on to the surface. This layer of cement paint will even out the textures of the concrete surface.

14. Leave the cement to dry for sometime. Later remove the lumber pieces. Wait for 24 hours before using those steps again.

Guide to Clean Marble

Cleaning regular marble

Marble is considered as very porous substance which can sustain stains very easily. You need to take an extra care while dealing with your marble. Never put cups or glasses without having coasters on surface of the marble. Otherwise cups will leave a stain in the form of ring on the marble surface. Clean any drink or liquid spills immediately to avoid damage. Clean your marble regularly with damp cloth and dry towel to keep the marble surface sleek.

It is recommended to wash and clean marble thoroughly with solution of dish washing detergent and warm water twice a year. Wash the marble with solution then rinse it with warm damp cloth and finally dry it with the towel. You can also apply wax on the marble to keep its surface safe from damages or scratches. Marble sealer is also an option to provide a solid protection. One thing you have to remember here is; do not use wax on white marble as it fades it color to yellow.

Cleaning dull marble

If you find that the marble has gone dull and lost its shine and attraction, purchase a commercial grade marble cleaner and polish. Many marble companies provide you with marble care kits, but commercial marble cleaner is much faster and easy to use than those kits. You have to purchase the right kind of cleaner for your marble as many companies sell imported marble polishes which is efficient for soft imported marble. Choose the best amongst all.

Putty powder or tin acid is also useful for cleaning and polishing dull marble. Just apply it with damp cloth on the marble surface and then use electric polisher to a polish the marble stone. In case your marble stone is badly damaged or scratched, it is better to consult the professionals which are into the business of marbles.

Cleaning stained marble

Stains are of different kinds and hence different kinds of chemicals are available in the market to suit the customer according to their needs. Organic stains like those caused by coffee, soft drinks, and tea can be removed with solution of ammonia mixed in 20 percent of peroxide. Apply the solution on the stains and leave it to dry. Later, clean it with damp cloth and dry.

For oil stains which are caused by lotion, cream or butter etc, use cornstarch. Leave it for few minutes then rinse with foamy detergent with the help if brush. After washing the stains dry the surface.